| 1. | Neural network model based on partial least square for fluidized bed reactor
基于部分最小二乘法的流化床反应器的神经网络模型 |
| 2. | Measurements of dew point temperature of flue gas in circulating fluidized bed reactor for flue gas desulfurization
循环流化床烟气脱硫塔内烟气露点的测定 |
| 3. | Modeling of an industrial turbulent fluidized bed reactor for manufacture of cyano - ethylene by ammoxidation of propylene
丙烯氨氧化生产丙烯腈工业流化床反应器的模型化 |
| 4. | An application of the method to slurry - feed ceramic melter and industrial fluidized bed reactor for predicting quality variables is presented to show the effectiveness
完成了对仿真过程和工业流化床聚乙烯生产过程质量指标软测量应用分析。 |
| 5. | Agreement between calculation and experimental data justified the model ' s predictability in pyrolysis reaction of biomass carried out in the fluidized bed reactor
由该模型得到的计算结果能和实验值很好吻合，表明它能较好地描述流化床反应器内生物质快速裂解的反应过程。 |
| 6. | In this paper , a model is presented to describe pyrolysis of biomass in a fluidized bed reactor , which is characterized with reaction routes related to the biomass particles either in dense phase or in dilute phase
摘要研究了流化床内的生物质快速裂解模型，其特点是考虑了原料粒子在下部密相区和上部稀相区的不同反应历程。 |
| 7. | Simulation results show that based on the regeneration kinetics of the catalyst , properly raising the reoxidation temperature of the catalyst in the fluidized bed reactor either can obviously improve the performance of the system or can reduce the solid flux and hence the energy consumption
结果表明，使烃类选择氧化（催化剂被还原）和催化剂氧化再生分开进行，特别是根据催化剂氧化再生动力学的要求，适当调节再生过程的温度，既能明显改善反应系统的性能，又可以大幅度降低催化剂固体颗粒的循环量，取得节能降耗的效果。 |
